Recommendations for Prolonging UPS Replacement Batteries’ Life

The introduction of hardware like computers and data centres brought in one significant global change – it transformed the way industries and offices store information. Everything moved from hard copies to soft copies, where papers were replaced by hundreds of software. However, both these ways of storing data come with their own risks.

If hard copies might be at risk of being misplaced, then soft copies too are at constant risk of vanishing if they are suddenly cut short of power. That’s where the need for UPS replacement batteries arises . It is therefore essential to take care of them in a way that will maximise the life expectancy of your battery and keep you prepared in need of the hour.

Here are a few recommendations for prolonging the UPS replacement batteries’ life:

1 Placement of the Unit

Unit placement is of utmost importance when it comes to looking after UPS replacement batteries. Make sure you place the UPS in an environment that has a regulated temperature and enough room for proper ventilation.

Do not install the battery somewhere where the ratio of moisture is very high, or else it might hamper its functioning. Keep the battery away from humid areas and give preference to cool and dry places.

2 Enough Monitoring

You must have heard of single-phase UPS batteries that are often classified as ’maintenance free’. Often, people are slipped into believing that these batteries do not require much attention, but that is not the case.

A maintenance-free battery just refers to the fact that these batteries don’t require any replacement fluid. Hence, these UPS replacement batteries will also need regular care and monitoring.

3 Battery Chemistry

Every battery reaches a limit where it cannot supply power at its usual optimum level. Generally, in most cases, this is defined when it can no longer supply 80% of its capacity.

Unfortunately, many people do not recognise this point and continue using the same battery. The best and most common solution to this problem is to not waste any more time and replace the battery. This small step will ensure that your system is out of risk in case of unwanted power cuts.

4 Right Temperature

This point is extremely crucial but often ignored by many people. Every UPS is set to function at a particular temperature. According to professionals, a battery will show the best results when it is placed at a temperature of around 25°C; anything more or less than that will reduce the life of the battery by 50%. There is a thumb rule that can be kept in mind as general instruction when it comes to the functioning of UPS replacement batteries: every 8.3 degrees above or below the ambient temperature of 25°C will decrease the performance of the UPS.

5 Cycling

Cycling is a term that defines the basic functioning of a UPS. Whenever a system goes out of power, the UPS will automatically shift to battery power to provide the load energy. Once the power is restored, the UPS battery will mechanically recharge and start preparing for future power cut scenarios. This process is known as the discharge cycle.

Now, after completing multiple such cycles, one must have an understanding of when the battery is reaching its limit and needs to be replaced. With each discharge and subsequent recharge, the rated capacity of the UPS will slightly decrease. Hence, it will be valuable to keep track of these discharge cycles to predict the life span of the UPS replacement batteries.

Desktops are planted in almost every office and business site around the globe. They are typically put in place in huge numbers for employees of different departments. Therefore, it is absolutely essential to purchase UPS replacement batteries from trusted sources for ensuring the uninterrupted functioning of your system.

Further reading can be found here